Pole foundation pit should be consistent groove: groove pit length, width and depth dimensions shall comply with the design requirements 15m prestressed poles, which are allowable deviation ± 50mm. In the longitudinal direction of the pit straight rod groove should be parallel with the road side stone; in the longitudinal direction of the curve should be perpendicular to the rod groove pit and force direction of the force. Poles cast foundation or basis of the outer edge of the chuck and other facilities shall comply with the provisions of the minimum distance. Former tank pit excavation, shall be approved by the management unit rod pit near the municipal facilities approved. Telephone pole erection protective frame body check: protective frame erection to 15m high prestressing wire rod prices stand three steps, the design requirements should examine 15m prestressed wire rod plant, in line with 15m after prestressing wire rod production plant, erection continues upward. To the required height by the site technical officials and security officers in conjunction with the erection of the project team according to the provisions and requirements for inspection, after passing the examination and acceptance procedures for the handover party permit delivery. Overall protection frame must remain vertical, stable, not tilted outward. 15m prestressed wire rod manufacturers _ Kyushu Electric Power Tower _15m prestressing wire rods provided by Kyushu Electric Power Tower Henan limited liability company. Kyushu Electric Power Co., Ltd., Henan tower company (www.hnganta.com) in Henan, the other leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Kyushu Electric Power tower in leadership with the staff warmly welcome all inquiries negotiations to create Kyushu Electric Power tower a better future.