Vertical poles shall meet the following requirements: straight pole lateral displacement of allowable deviation ± 50mm. Only for feeder straight poles, should upright. Straight poles and roads for short straights cross arm awning line poles within wide 18.00m at the pole, can be tilted in the opposite direction to the force, tilt rate of not more than 8%; in the tight line, not to force side tilt. For the long arm and bend wire poles 8 m prestressed poles procurement, may the force in the opposite direction of the tilt, tilt rate of not more than 15%; not inclined to force the side after tight line. Pole group should be established before the visual inspection, and meet the following requirements: ① the surface is smooth, uniform thickness, 8 m prestressed pole price, no eccentric, exposed tendons, running pulp, cellular and other phenomena; ② not have longitudinal and transverse cracks; ③ shaft bent more than 2/1000, the top block is good. Pole length depending on the design chosen, there is the interface to make anti-rust treatment, paint to use at least two, the first to use anti-rust primer, then covered with silver paint. 8 m prestressed electric pole | Kyushu Electric Power Tower | Shandong 8 m prestressed poles provided by Kyushu Electric Power Tower Henan limited liability company. Kyushu Electric Power Co., Ltd., Henan tower company (www.hnganta.com) in Henan, the other leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Kyushu Electric Power tower in leadership with the staff warmly welcome all inquiries negotiations to create Kyushu Electric Power tower a better future.